Thanks for the kind words; I had so much fun building that chandelier! Please do reach out; it's always a lot of fun working with people who have a strong vision and working with them to figure out how to realize it in wood.
Regarding stick chairs, I put one together from an accumulation of scrap pieces recently (hey, this could be a leg some day! throws it in the stick chair pile). Putting one together out of random pieces and letting the pieces you have "inform" the design is about as close as it gets to the sheer hackery joy of banging together some wild one-liner (if I use awk this way and pipe it to sort it'll do what I want) in the shell and hitting enter.
It's like, there's no way this could possibly work, and then you're sitting in it marveling at the fact that it only wobbles a bit. And then you level the feet (or fix your quoting), and damn if it doesn't do just what you want it to!
It's also a cool opportunity to make some of your own tools. Jennie Alexander has a great article on making your own tapered reamer[0] (which does sort of require a lathe), and Tim Manney has one on using your reamer to make a tapered tenon cutter[1].
[0] https://www.greenwoodworking.org/steel-saw-tapered-reamer-pl... Dunno what's up with the certificate error, but the site is legit. You don't have to get picky about the compass saw. I did this out of one I picked up at my local large home improvement store.
Regarding stick chairs, I put one together from an accumulation of scrap pieces recently (hey, this could be a leg some day! throws it in the stick chair pile). Putting one together out of random pieces and letting the pieces you have "inform" the design is about as close as it gets to the sheer hackery joy of banging together some wild one-liner (if I use awk this way and pipe it to sort it'll do what I want) in the shell and hitting enter.
It's like, there's no way this could possibly work, and then you're sitting in it marveling at the fact that it only wobbles a bit. And then you level the feet (or fix your quoting), and damn if it doesn't do just what you want it to!
It's also a cool opportunity to make some of your own tools. Jennie Alexander has a great article on making your own tapered reamer[0] (which does sort of require a lathe), and Tim Manney has one on using your reamer to make a tapered tenon cutter[1].
[0] https://www.greenwoodworking.org/steel-saw-tapered-reamer-pl... Dunno what's up with the certificate error, but the site is legit. You don't have to get picky about the compass saw. I did this out of one I picked up at my local large home improvement store.
[1] http://timmanneychairmaker.blogspot.com/2015/06/use-your-rea...