It took a long time to move from the old component input over to HDMI. The main thing that drove it was the SD to HD change. You needed HDMI to do 1080p (I believe, IDK that component ever supported that high of a resolution).
Moving from HDMI to display port is going to be the same issue. People already have all their favorite HDMI devices plugged in and setup for their TVs.
You need a feature that people want which HDMI isn't or can't provide in order to incentivize a switch.
For example, perhaps display port could offer something like power delivery. That could allow things like media sticks to be solely powered by the TV eliminating some cable management.
The legacy issue is even worse than that. I have a very new Onkyo RZ30 receiver and it is all HDMI with no DisplayPort to be seen. So it is the whole ecosystem including the TV that would need to switch to DP support.
> For example, perhaps display port could offer something like power delivery.
It already does. A guaranteed minimum of 1.65W at 3.3V is to be provided. Until very recently, HDMI only provided a guaranteed minimum of something like 0.25W at 5V.
It's not nothing, but it's also very little to play with.
5W is what I'd think is about the minimum for doing something useful. 25W would actually be usable by a large swath of devices. The raspberry pi 4, for example, has a 10W requirement. Amazon's fire stick has ~5W requirement.
> It's not nothing, but it's also very little to play with.
Sure. But it's ~6.6x more than what HDMI has historically guaranteed. It's pretty obvious to anyone with two neurons to spark together that the problem here isn't "amount of power you can suck out of the display port". If it were, DP would have swept away HDMI ages ago.
> It's pretty obvious to anyone with two neurons to spark together that the problem here isn't "amount of power you can suck out of the display port".
Nobody said it was.
I gave that out as and example of a feature that DP might adopt in order to sway TV manufacturers and media device manufactures to adopt it.
But not for nothing, 0.25W and 1.67W are virtually the same thing in terms of application. Just because it's "6.6x more" doesn't mean that it's usable. 0.25W is 25x more than 0.01W, that doesn't make it practically usable for anything related to media.
> But not for nothing, 0.25W and 1.67W are virtually the same thing in terms of application.
You really can't power an HDMI (or DisplayPort) active cable on 0.25W. You can on 1.67W. This is why in mid-June 2025 the HDMI consortium increased the guaranteed power to 1.5W at 5V. [0] It looks pretty bad when active DP cables (and fiber-optic DP cables) never require external power to function, but (depending on what you plug it into) the HDMI version of the same thing does.
> Nobody said it was.
You implied that it was in a bit of sophistry that's the same class as the US Federal Government saying "Of course States' compliance with this new Federal regulation is completely voluntary: we cannot legally require them to comply. However, we will be withholding vital Federal funds from those States that refuse to comply. As anyone can plainly see, their compliance is completely voluntary!".
DP 1.4 could have offered 4kW over its connector and TVs would still be using HDMI. Just as Intel and Microsoft ensured the decades-long reign of Wintel prebuilt machines [1], it's consortium that controls the HDMI standard that's actively standing in the way of DP deploying in the "home theater".
[0] "HDMI 2.1b, Amendment 1 adds a new feature: HDMI Cable Power. With this feature, active HDMI® Cables can now be powered directly from the HDMI Connector, without attaching a separate power cable." from: <https://web.archive.org/web/20250625155950/https://www.hdmi....>
[1] The Intel part is the truly loathsome part. I care a fair bit less about Microsoft's dirty dealings here.
> You implied that it was in a bit of sophistry that's the same class as the US Federal Government saying "Of course States' compliance with this new Federal regulation is completely voluntary
This is a very bad faith interpretation of my comment. I did not imply it and I'm not trying to use CIA tricks to make people implement it as a feature.
It took a long time to move from the old component input over to HDMI. The main thing that drove it was the SD to HD change. You needed HDMI to do 1080p (I believe, IDK that component ever supported that high of a resolution).
Moving from HDMI to display port is going to be the same issue. People already have all their favorite HDMI devices plugged in and setup for their TVs.
You need a feature that people want which HDMI isn't or can't provide in order to incentivize a switch.
For example, perhaps display port could offer something like power delivery. That could allow things like media sticks to be solely powered by the TV eliminating some cable management.